How To Set Up A Radon Test Kit

Instructions for Testing Your Home

Where Should a Detector Be Placed?

Radon levels vary considerably from location to location in the aforementioned building.  Radon oft enters from the soil underneath the basement or slab, and radon levels are commonly highest in the lowest level of the building.

The US EPA uses the terms "lowest level ... suitable for occupancy ... without renovations" in recommending a location to exam for radon.  If yous have a lowest level with a bedchamber, function or family room, yous should set up your radon detector in one of these rooms.  If y'all rarely use the lowest level in your home, you may wish to place an additional detector in a frequently used room on the next everyman level.

Place a radon detector in the animate zone, 2-6 feet higher up the flooring, and abroad from drafts, outside walls, sumps, drains, windows or doors.  Radon may enter a building through cracks in the foundation or through sumps or drains and will usually be higher well-nigh these entry points.  More than detailed instructions are included with each RSSI Alpha-track radon test kit.

Starting Your Test

• Read the placement instructions for your radon detector and choose a examination location

• Remove the Blastoff-track detector from its protective pouch

• Write the start appointment on the radon detector

• If you plan to hang the detector, firmly slide the hook into the groove on the bottom of the detector

• Leave the radon detector in one identify for the unabridged test flow

• Save the information form and the return mailer box

Catastrophe Your Exam

• Write the end appointment on the radon detector

• Fill up out the Information Card Class

• If you lot lost your Data Card course you can Download an RSSI Consumer Data Card Form

• Be sure to keep a tape of your radon detector number

• Exercise Non tape up the radon detector or put it in a bag or pouch

• Place the radon detector and the information class in the return mailer box

• If you lot lost your mailer, use a padded envelope or pocket-sized cardboard box and mail it to the accost on the detector

• Be sure the mailer or envelope is sealed

• RSSI does non recommend testing for periods shorter than a month. For tests 15 days or longer, the render mailer is acceptable for return shipping.  For tests eight to 14 days long, detectors must be be sent overnight to RSSI.  (Note: If not using the business respond label, shipments to RSSI should non have deliveries scheduled for Saturday or Sunday.)

Getting Your Results

• Your radon detector will exist analyzed within seven business days of its inflow at the lab.

• Results are bachelor on-line by entering your detector number.

• A written report will be sent to you lot via mail or email.

< Dorsum to Radon Page

How To Set Up A Radon Test Kit,

Source: https://www.rssi.us/radon-instructions-home-test.htm

Posted by: singliscal.blogspot.com

Share this post